Reverse power monitoring device TC-3065

       Reverse power monitoring device TC-3065 belongs to Baoding Special Chuang Power Technology Co., LTD。

       TC-3065 is suitable for 380V and other equipment reverse power monitoring devices

       l The reverse power monitoring device TC-3065 can be centrally assembled or dispersed on the switch cabinet，Each interval functions independently，The devices are connected only by a network，Information sharing，This makes the whole system not only flexible，And its reliability has also been greatly improved，The failure of any one device affects only one local component。

       The device adopts high performance processor and high resolution A/D converter, 32 sampling points per week, combined with special measurement CT, to ensure the high precision of remote measurement。

       The protection function does not depend on the communication network at all, and the failure of the network does not affect the normal operation of the protection。

       The device adopts full seal design, coupled with well-designed anti-interference components, so that the anti-vibration ability, anti-electromagnetic interference ability has been greatly improved。

       The software and hardware dual watchdog function is designed to make the whole system have high measuring accuracy and anti-interference ability at the same time。

       Friendly man-machine interface, the device adopts the Chinese large-screen LCD display, trip report, alarm report, remote message, telemetry, set value setting, etc. are clearly marked in Chinese characters on the LCD, easy for users to use and master。

       Reverse power monitoring device TC-3065 main function introduction

       Reverse power monitoring device TC-3065 In addition to reverse power and reverse power recovery functions, in the system operation, the device constantly monitors the bus voltage and measure the current, with abnormal current and voltage alarm function, the Settings are as follows:

       (1) Overvoltage alarm

       (2) Low voltage alarm

       (3) overload alarm

       (4) Reverse power

       (5) Reverse power recovery

       (6) Measurement and control functions: U, I, P, Q, cosΦ, F (requires measurement current and voltage input)

       (7) 485 communication interface, according to the modbus protocol mode can communicate with the monitoring system, upload fault information,

       And multi-time control information to monitor the operation of the inverter regulation system。